Windows and Doors Alliston

If you want to make your house more energy-efficient, or if you want to make it more appealing, then this question is important.  Putting in new windows and doors will not only improve the appearance of your home, but also make it easier to heat and cool.

Step 1: Plan the Job

The size and type of window/door you need must be determined before we begin installing them. What is the purpose of the window/door? What is the space available for the frame? What material will we use? By spending some time now, you can avoid future problems when installing your windows/doors.

Step 2: Preparing Walls

Usually, leaks around windows are caused by moisture that has penetrated the building due to poor preparation. Luma specialists will ensure that all old plaster, loose bricks, or mortar are removed before applying new rendering and plaster. Furthermore, any damp areas will be treated and dried before you start installing your windows/doors.

Step 3: Window Frames

As part of the installation process, we will verify that the wall adjacent to your window or door is clean and level. Before installing the window framework, we will fill any uneven surfaces with a suitable filler. Be sure all nails are countersunk below the surface of the woodwork (preferably by pre-drilling holes). It is important that screws or nails used for fixing frames to brick walls do not penetrate too deep into the brickwork. Otherwise, removing items like internal doors might cause damage in the future. During the expansion and contraction of bricks and mortar, we will ensure that no timbers will be dislodged from cavity walls.

Step 4: Window or Door Installation

Secondly, when we install your window/door, we will make sure that they are securely attached to the frame of the surrounding wall and floor at a variety of points to ensure an adequate wind load. You will need to wait until your window or door has settled before it can be permanently fixed. Once a glass panel is installed, we always make sure that any excess water penetration won’t cause it to come unglued (use sealant on the edges of the panels).

Most homeowners are eager to make their home look better when it comes to replacing windows or doors. A new door can save energy costs, improve security and make the home’s exterior look more appealing. However, many homeowners are on a budget and are hesitant to install new doors or windows on their property until they’ve had the chance to get an estimate.

Our company offers free window and door replacement estimates. Our team of professionals will come out to your home, look at the replacement job and provide you with a quote to see if it’s within your budget.

Windows and doors installation process time varies depending on various factors. These include the number of windows or doors to install, the brand, style, and size of the window or door, and what you intend to use them for. The more windows or doors that are being installed, the longer the process will take. Also, larger windows may require more carpentry work to frame them in, which can add time to the process. Additionally, if you’re going for a specific look, you may need to consider matching window and door styles with each other, along with the siding of the house.

Vinyl has become a very popular choice for door and window frames, especially in new construction. Many people think that because vinyl is usually less expensive than other materials, it must not be as good. The truth is that vinyl frames are quite durable and have a lifespan of over 50 years.

Why are vinyl frames becoming more popular?        

Vinyl is very cost effective compared to other frame materials. Vinyl frames usually require less energy for heating and cooling, because they have low U-factors.

What are some common features found in quality door and window frames?

Window manufacturers use several ways to create durable window frames that offer high performance at affordable prices. For example, their products may use:

·Low-emissivity (Low-E) glass

·Argon, krypton or other gas fills in the airspace between the panes of glass.

·Tight seal to prevent cold drafts and energy loss.

Vinyl window manufacturers often add extra features such as:

EnergyStar ratings for improved efficiency and performance.  EnergyStar is a joint program set up by Canada and United States to encourage better environmental practices in manufacturing industry. EnergyStar sets standards for products that save money and reduce greenhouse gasses by meeting strict guidelines on energy requirements during production and testing.

When do I know that it’s time to replace the entry doors of my house?

You’ll need to inspect your entry doors thoroughly and take into consideration multiple factors before you can determine whether or not it is time for you to buy new front doors. However, here are some basic signs that replacement is necessary:

1.) If your wood has cracked

Wood cracks as a result of warping and changes in humidity. The longer you wait to fix, replace, or at least repair this damage, the more likely it will be that water will seep through these cracks and cause costly damages inside your home such as structural problems. Replacing exterior front door panels can be expensive but well worth the price if you plan on staying in your home for a long time.

2.) If your paint is peeling

Paint on exterior entry doors are especially vulnerable to sun damage, chipping, and cracking. Inspect the paint surface carefully for signs of wear and tear or large chunks of paint that have come off due to over-exposure to the elements. Have someone close by help you check just in case you’re not able to see everything clearly.

3.) If your door is damaged beyond repair

Door panels dent easily if they get hit with high force or otherwise mishandled. Other damages such as broken window panes, huge cracks in the wooden frame, split wood around screw holes can also be warning signs that your front door needs replacing ASAP before it’s too late.

If you’ve identified your entry door is in such a state, don’t put it off any longer and call an expert who can install new exterior front door panels for you. Replacing the entry doors of your house is not only something that needs to be done from time to time for safety purposes but can also raise your curb appeal significantly. Take note of all these signs so you’ll know when the right time has come!

As part of good home maintenance, homeowners need to replace the windows of their house periodically. However, it can sometimes be difficult to determine if your windows need replacing or just need a little more care. Here are some things that you might notice when it’s time to replace the windows in your house:

The panes of glass are broken . Broken panes of glass cause drafts and can let in pests that would have otherwise been kept out by the window screens. Replacing a single pane is generally not expensive, but repairing a double-pane window can be work intensive and costly. The best thing for homeowners who have multiple broken panes in their windows is replacement with energy efficient models that require no extra glazing for insulation.

Broken panes of glass cause drafts and can let in pests that would have otherwise been kept out by the window screens. Replacing a single pane is generally not expensive, but repairing a double-pane window can be work intensive and costly. The best thing for homeowners who have multiple broken panes in their windows is replacement with energy efficient models that require no extra glazing for insulation. The windows don’t lock properly . If your windows are difficult to close or they do not stay open on their own, you might want to consider replacement even if there are no cracked panes of glass. Over time, sticking windows can deteriorate the seals around them slowly letting air escape from your home resulting in higher heating bills during colder months.