Windows and Doors Oakville

This is an important question for people that want to know how they can keep their house more energy-efficient or just nicer.  Putting in new windows and doors will change the look of your place, but also make it easier to heat and cool.

Step 1: Plan the Job

Before we start to install your windows or doors, we will need to plan what size and type of window/door you’ll need. What function will the window/door serve? How much room do I have for the frame of the window/door? What material we will use? Taking time at this stage will reduce any future problems when installing your windows/doors.

Step 2: Preparing Walls

The most common cause of leaks around windows is moisture that has penetrated the building due to poor preparation. Luma experts will ensure that all old plaster, loose bricks, or mortar are removed before applying new rendering and plaster. Also, any damp areas will be treated and dried out before you start to install your windows/doors.

Step 3: Window Frames

Before installing the frame for your window or door, we will check that the adjoining wall is clean and flat. We will fill any uneven surfaces with a suitable filler before installing the window framework. Ensure all nails are countersunk below the surface of the woodwork (preferably by predrilling holes). When fitting frames to brick walls we will make sure that screws or nails used do not penetrate too far into the structure of brickwork otherwise it could cause damage in future years when items such as internal doors need to be removed. For cavity walls, we will ensure that no timbers can become dislodged due to the expansion and contraction of bricks and mortar.

Step 4: Window or Door Installation

Finally, when installing your window/door, we will make sure that they are secured to the frame of the surrounding wall and floor at different points to provide an adequate wind load. Once you have installed your window or door, we will allow it to settle before permanently fixing it. Also, once installed we always make sure that any glass panels installed do not become dislodged due to excess water penetration (use sealant around pane edges).

It varies greatly depending on the window size, the number of windows, the type of door, the access for installation, etc.

It varies greatly depending on the window size, the number of windows, the type of door, the access for installation, etc.

The ease of installation and long-lasting durability of vinyl make it a popular choice for door and window frames. These are some reasons why vinyl may be the right choice if you are investing in new windows or doors:

Window and door frames made from vinyl can be as aesthetically pleasing as wood. It resembles real wood without many of the hassles that come with it thanks to the colors and textures available.

Window and door fixtures made out of vinyl can be shaped into almost any shape you want – squares, rectangles, circles – there really isn’t an end to how they can be shaped.

For door and window frames, vinyl is a good choice. With its different colours and textures, vinyl can take on the appearance of real wood. Vinyl is the best choice for new windows and doors due to its ease of installation and durability.

• You feel drafts around your exterior door – If you feel a draft around your door while you’re inside or see condensation on your windows, it may be that your door is not properly sealed.
• Changes in temperature and humidity levels could cause your entryway to warp if you notice it is no longer straight or level. Metal doors can become warped over time by this.
• It doesn’t fit the frame – If you find that your exterior doorway is too big for your house’s frame after opening or closing the door, it might be too big. It is best to replace the jambs if both sides are out of alignment beyond repair.
• Having problems locking your door – If your existing door sticks in its frame when closing, or that it opens more easily from one side than the other, you may have a hardware issue. For instance, corroded locksets and rollers, loose hinges, cracks in the threshold or jamb, improperly installed handle sets, etc. 

Knowing when to replace your windows is very important since windows are a key element of your house.

1) Age

Windows aren’t indestructible. The windows start to rot after 4-7 years (depending on the severity of the weather conditions).

2) Wear and Tear

It might be time to replace your windows if they are damaged in any way (cracked glass, broken seals, rot, etc.). Repairing the damage is not advised if the windows are showing signs of wear and tear since this could lead to more problems down the line. As windows can be repaired for roughly the same price as they can be replaced, it is often better to get them replaced rather than repair them.

3) Windows don’t fit properly

The reason you might not be able to close your windows properly is that if you’ve replaced one or two window sashes but the others still don’t work, there might be an issue with how your windows were installed originally. Especially if you are looking for double glazing, this can cause draughts to form through your windows.